Canadian Concrete Leveling Before & After Photos

Nature and the elements have a way of taking a toll on things. Wood, metal, and especially concrete, bear the brunt of everything Mother Nature throws at it.

A customer in Uxbridge, Ontario, was dealing with an uneven concrete step in their backyard. Poor soils below had shifted over the years, and now there was a tripping hazard where there shouldn't be.

The customer reached out to Canadian Concrete Leveling and met with Project Manager Joe McColl. Joe inspected the backyard and showed the customer our PolyLevel® System. 

Foreman Kyle McKeown and Installation Specialist Mark Sealy drilled dime-sized holes through the top of the step and injected our high-density polyurethane to lift the concrete.

The customer is very satisfied with the work done. He doesn't have to worry about tripping, and the soils beneath his step have been stabilized.

Receiving upsetting news about your home is never a good experience. You put your money and trust into a contractor, and if they’re wrong, it could end up costing you thousands. 

A customer in Pickering, Ontario, reached out to Canadian Concrete Leveling about his cracked garage floor. A different company told him he would need to remove the entire floor and have it repoured. After meeting with Project Manager Paul Mendell, he realized that wasn’t true. 

After Paul showed him how our PolyLevel® system works, the client booked a repair date. Foreman Kyle McKeown started by drilling dime-sized holes as injection ports into the floor. He injected our high-density polyurethane beneath the concrete to fill the void and compress fill soils below. Once the repair was done, Kyle patched the holes with fresh concrete.

The customer is thrilled that he decided to call Canadian Concrete Leveling rather than go with the original company. He saved himself thousands of dollars and had the work done in one day rather than one week.

A large gap around a family’s pool deck became a huge concern for safety when the children swimming had a few close calls. They called CCL to see about finding a solution so they could continue entertaining without the worry of other safety concerns.

 

Our Project Manage assured the homeowners that they would be back to entertaining in no time with our PolyLevel Injection System. PolyLevel® is used to lift and level out the gap between the two concrete slabs by the steps. With the finished look, the gap was closed and the stress of a potential slip and trip accident was gone!

Basement foundations are susceptible to water damage, so keeping water away is a great first step to ensure a dry basement.

A customer in Uxbridge, Ontario, was dealing with a front porch that was sloping towards their home. Each time it rained water would pool beside the foundation. They were concerned about water seepage and didn’t like continually having a puddle outside their home, so they reached out to Canadian Concrete Leveling. 

Project Manager Joe McColl met with the customer at his home and inspected his front porch. He took measurements of the slope and settlement, and a date was set for the repair.

Foreman Bill McKeown drilled dime-sized holes throughout the front porch. He used these holes to install our PolyLevel® polyurethane system. PolyLevel® expands as it’s injected beneath concrete, compressing fill soils and lifting slabs.

The customer is thrilled that his porch no longer pools. His basement is protected, and our non-invasive method saved him the time and money of pouring new concrete.

Our new client in Port Sydney, Ontario, had an uneven basement floor. The home is currently under construction, and the basement concrete flooring was poured in the Springtime. Unfortunately, the concrete did not settle properly, and when Summertime rolled around, it caused the outer edges to sink, leaving the middle higher like a hill. The builder needed to find a solution quickly that won't break the budget for the home. 

In little to no time, the builder found our social media pages and knew we could fix the concrete effectively and affordably. After contacting us, we sent our experienced Project Manager, Paul Mendell, to the home. He walked the builder through what would be done, how long it would take, and what day works for them to bring the installation team. Once the schematic was drafted, and the quote was made, we got the go-ahead to bring our Installation Specialist, Bill McKeown, to the job site and begin the work. With the schematic in place and the builder removing the middle hump, this leveling job was no challenge for Bill. Within less than an hour, everything was levelled to perfection. Our polyurethane injection method went into full effect, leaving the builder stunned with the result.